AOR AR7000 Dokumentacja Pobierz pdf (Strona 29)

key to accept the input for each character. Other options include Insert, Delete,

Space and Quit. Refer to section 7 of this manual for further details.

{figure 87}

C Stop time

Push the [ENT] key when the cursor is placed alongside the item “Stop Time”.

{figure 88}

Rotate the main dial or push the [←] [→] keys to select the desired stop time in

seconds followed by [ENT].

: The program search will stop as long as the signal stays above the squelch

threshold, search will resume once the signal drops below squelch threshold and the

squelch closes.

01 - 99: The program search will automatically resume as soon as the pre-

determined stop time (in seconds) has elapsed even if the frequency is still active. If

the squelch closes before stop time has elapse, search resumes immediately.

D Search direction

Push the [ENT] key when the cursor is placed alongside the item “Direction”. Rotate

the main dial or push the [←] [→] keys to select the desired search direction followed

by [ENT].

{figure 89}

FWD

: The search starts from the start (lower) frequency and tracks upward in

frequency toward the stop (upper) limit then hops down to the start frequency and

the process repeats.

REV

: The search starts from the stop (upper) frequency and tracks downward in

frequency toward the start (lower) limit then hops up to the stop frequency and the

process repeats.

LOOP

: The search shuttles (bounces between limits) between the start and stop

frequencies.

Link

: The search starts from the start frequency and progresses to the stop

frequency, then jumps to other program search banks which may have been linked

(forming a large family of program search banks).

E Start frequency

Push the [ENT] key when the cursor is placed alongside the item “Start”. Enter the

desired start frequency via the keypad followed by [ENT].

{figure 90}

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 44 45

Brak uwag

AOR AR7000 Dokumentacja Strona 29